Global Premium Manufacturer ofDiamond Tools for Cutting Stone

帮助默认广告
Current location: Home »Advice & suggestion

1.Have you face some problem of your past buying experience from others ,do you looking for that’s common problem solution?

Ans:If you have faced before Chipping ,stone corner broken problem from others then you can try our products it should be give this common problem solution.

2.What is the best advice to use marble saw blade for cutting marble stone?

Ans:For Marble saw blade we advice you to check bond spec,saw speed ,cooling technique ,working life for your good cutting effect.We can recommend you to use our Black queen,Yellow scud,Super scud & white angle.

3.What is the the best advice to use granite saw blade for cutting granite stone?

Ans:For Granite saw blade we advice you to check spec of segment ,welding strength,well working life .We can recommend you to use Our Allround guy series.

4.Please could tell me what are the important details in selecting a Saw blade?

Ans:There are lots of things to be concerned with when purchasing a blade. The right blade makes a job much easier.

A) Bond Specs – How the diamonds are bonded to the blade is important. A soft bond is good for hard materials (concrete, marble, granite, etc), and a hard bond is good for abrasive materials (asphalt, limestone green concrete, cinder block, etc). Using the incorrect bond will greatly decrease your blade life.

B) Saw Horsepower - Make sure your blade is rated for the horsepower on your saw. This detail is often overlooked. A saw that has too much horsepower will use up a blade prematurely.  

C) Cooling Technique - Will you cool the blade with water or air? We suggest water. Make sure you have enough. If you use air you must allow the blade to cool every few feet of cut by running it at full speed outside of the cut.

D) Blade Life vs Cutting Speed - Typically, there is an inverse relationship between cutting speed and blade life. If the operator makes a change, such as increasing cutting pressure to make a blade cut faster, blade life will tend to be shortened as a result. Likewise, if an operator wants to extend the blade's life, he can reduce cutting pressure and cut slower.